Home Product Low-voltage Current Transformers CNT-ASEN

IOT INTELLIGENT CURRENT TEMPERATURE SENSOR

IOT INTELLIGENT CURRENT TEMPERATURE SENSOR

Product function

◆ Double coil design, with protective current measuring device, overload 10-20 times of unsaturated current.
◆ Double power supply
The electromagnetic energy of AC power line is collected and converted into electrical energy to provide working power for the sensor. When the measured object through the AC current is greater than 0.5A, the sensor can start to work. And through the intelligent energy storage technology to store excess energy, to ensure the continuous work of the sensor. If the current in the line is less than the starting current or the line is in power failure state, the backup battery in the sensor can be used to supply power to keep the sensor working normally.
◆ Data measurement and transmission
During the working period of the sensor, according to the set acquisition frequency, the surface temperature of the cable can be measured by the temperature sensor, and the current flowing through the cable can be measured by the current transformer, so as to realize the online monitoring of the cable temperature and current at the same time. At the same time, the sensor can automatically adjust the measurement time according to the amount of collected energy. The collected data is transmitted to the receiving device through 433MHz wireless link.

Product Material

Wireless receiving mode

Star structure point to point communication
Storage temperature

-20 ~ +55℃
Working humidity range

-40~150℃ Non battery powered

Inquiry

Download

Product overview

Internet of things intelligent wireless passive current temperature sensor is to realize the needs of low-voltage distribution network intelligence and automation, comprehensive data acquisition and monitoring is necessary. Through real-time online monitoring of the temperature, current and voltage of cables and bus bars, early hidden dangers can be obtained to ensure the safety of users. The passive composite sensor uses the electromagnetic energy around the transmission line to obtain electric energy, online monitoring the temperature and current of the cable, combined with wireless communication, to complete the fast and accurate online measurement and save the shackles of the cable, and realize the function of wireless data transmission. The product does not need external power supply and is maintenance free for life. It is suitable for on-line monitoring of temperature and current of transmission conductor in low voltage switchgear. The sensor directly contacts the surface of the electrical equipment, and the built-in analog temperature sensor senses the ambient temperature of the contact surface and gets the corresponding voltage signal. The temperature of the surface of the live equipment can be determined by the relationship between the voltage signal perception. Non direct contact, electric field induction is used to detect whether the line is charged, and to detect whether the line is charged when there is no load and no current passing through.

Technical parameters of wireless current temperature sensor
Wireless receiving mode	Star structure point to point communication	Energy source	Power frequency magnetic field+replaceable high temperature lithium battery
Temperature and current acquisition and transmitter	5S(Primary current above 1A)	Minimum deenergization current	0.5A,AC
Minimum starting current cold start time	≤4min	Working humidity range	-40~150℃(Non battery powered)
Recommended operating temperature range	-40℃~+85℃	Protection level	IP45
Storage temperature	-20℃~+55℃	Installation method	Snap fixed installation