Home Product Low-voltage Current Transformers CNT-HFCT1

HIGH FREQUENCY PARTIAL DISCHARGE CURRENT SENSOR

HIGH FREQUENCY PARTIAL DISCHARGE CURRENT SENSOR

Product features

◆ The partial discharge sensor is integrated with the sheath circulation sensor
◆ Fast response speed, up to ns level
◆ Wide frequency band, frequency full circle 300KHZ-100MHZ
◆ Good linearity, high precision

Product Material

Operation frequency range

0.3MHz-100MHz
Measuring range

0.1A-1KA
Measuring accuracy

±0.5％
Class of protection

IP68
Operating temperature

-40℃-70℃
Aperture

Φ45mm

Inquiry

Download

Product overview

When partial discharge occurs inside the cable, the high-frequency current will propagate to the ground along the ground wire. A sensor is installed on the ground cable to detect high-frequency current signals for local discharge detection.
The circulation sensor uses the Roche coil working mode, and there is no electrical connection between the measurement loop of the sensor and the measured current, which belongs to the non-invasive detection method, and the equipment under test does not need to be shut down.

Local discharge sensor	Performance index	Sheath circulation sensor	Performance index
Operation frequency range	0.3MHz~100MHz	Measuring range	0.1A~1KA
Sensitivity	0.1pc	Rated output	500mV/1000A 50Hz
Transmission impedance	15mv/mA	Position sensitivity value	±1.5％
Matched impedance	50Ω	Measurement accuracy	±0.5％
General requirement
Class of protection	IP68	Operating temperature	-40℃~70℃
Aperture	Φ45mm	Storage temperature	-40℃~100℃
Output interface	Line length 5 meters,corrugated sleeve,local discharge BNC connector,circulation sensor with M12 aviation plug.